Redcat Ascent-32 1S LiPo Battery (3.7V/300mAh) w/PH2.0 Connector RER41730

    Description

    Battery Overview:

    The Redcat Ascent-32 3.7V 300mAh LiPo Battery is a direct replacement power source designed for the Ascent-32 Rock Crawler. Compact and lightweight, it delivers reliable, consistent power for extended run times and optimal performance. Built with quality cells for safety and durability, this LiPo battery ensures your crawler stays powered and ready for every off-road adventure.

    Features:

    • Direct replacement fit
    • Lightweight and compact design
    • Durable LiPo cell construction
    • Easy charging compatibility

    IMPORTANT LITHIUM POLYMER SAFETY INFORMATION

    • DO NOT leave a battery in your model when charging
    • DO NOT leave lithium batteries unattended when charging
    • ALWAYS balance charge lithium battery
    • ALWAYS use a LiPo Safe charging bag/box
    • YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)
    • YOU MUST not over discharge lithium battery packs
    • READ & UNDERSTAND the instructions carefully before operating this battery

    NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.

    Includes:

    • (1) Ascent-32 1S LiPo Battery (3.7V/300mAh) w/PH2.0 Connector

    Specifications

    Nominal Voltage: 3.7V (1S)
    Capacity: 300mAh
    Maximum Charge Rate: 1C (0.3A)
    Discharge Rates
    Continuous: -
    Peak: -
    Cell Configuration: -
    Watt Hours: 1.11Wh
    ROAR Approved: -
    Connectors
    Battery: PH2.0
    Balance: -
    Dimensions (LxWxH): -
    Weight:
    Product form

    SKU: RER41730
    Barcode: 843335122708

    Free pickup in our shop(s)

    Be quick! Only 2 products left in stock!

    2 in stock Ships within 24hr of Purchase

    $9.99

      • Guaranteed secure & safe checkout.

        shop pay
      • Free shipping on orders over $150
      Pay whenever you want

      Easily pay within 30 days after you have received your package.
      Read more

      Description

      Battery Overview:

      The Redcat Ascent-32 3.7V 300mAh LiPo Battery is a direct replacement power source designed for the Ascent-32 Rock Crawler. Compact and lightweight, it delivers reliable, consistent power for extended run times and optimal performance. Built with quality cells for safety and durability, this LiPo battery ensures your crawler stays powered and ready for every off-road adventure.

      Features:

      • Direct replacement fit
      • Lightweight and compact design
      • Durable LiPo cell construction
      • Easy charging compatibility

      IMPORTANT LITHIUM POLYMER SAFETY INFORMATION

      • DO NOT leave a battery in your model when charging
      • DO NOT leave lithium batteries unattended when charging
      • ALWAYS balance charge lithium battery
      • ALWAYS use a LiPo Safe charging bag/box
      • YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)
      • YOU MUST not over discharge lithium battery packs
      • READ & UNDERSTAND the instructions carefully before operating this battery

      NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.

      Includes:

      • (1) Ascent-32 1S LiPo Battery (3.7V/300mAh) w/PH2.0 Connector

      Specifications

      Nominal Voltage: 3.7V (1S)
      Capacity: 300mAh
      Maximum Charge Rate: 1C (0.3A)
      Discharge Rates
      Continuous: -
      Peak: -
      Cell Configuration: -
      Watt Hours: 1.11Wh
      ROAR Approved: -
      Connectors
      Battery: PH2.0
      Balance: -
      Dimensions (LxWxH): -
      Weight:

      Recently viewed products

        © 2026 Auer Ace Hobbies, Powered by Shopify

          • American Express
          • Apple Pay
          • Diners Club
          • Discover
          • Google Pay
          • Mastercard
          • PayPal
          • Shop Pay
          • Visa

          Login

          Forgot your password?

          Don't have an account yet?
          Create account